Delta Ohm HD2114P Differential Pressure Manometer Velocity Meter

HD2114P.0 Micro manometer-Thermometer for air speed and flow rate measurement by means of Pitot tubes, full scale 20mbar for speed measurements from 2...55m/s. Temperature measurement by K type thermocouple. Storage of maximum, minimum, average value. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree.

HD2114P.2 Micro manometer Data Logger for air speed and flow rate measurement by eans of Pitot tubes, full scale 20mbar for speed measurements from 2...55m/s. Temperature measurement by K type thermocouple. Datalogger which stores the maximum, minimum, average value and can store up to 36.000 couples of samples. RS232C/ USB output for data transfer in real time to a PC or printer. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree. Measuring units °C - °F - Pa - mbar - mmH2O - PSI - m/s - km/h - ft/m - mph - knot - l/s - m3/h - cfm.

ORDERING CODES
#HD2114P.0: The kit consists of the HD2114P.0 with 20mbar full scale and thermocouple K input, 4 1.5V alkaline batteries, operating manual, case. The Pitot tubes have to be ordered separately.
#HD2114P.2: The kit consists of the HD2114P.2 datalogger with 20mbar full scale and thermocouple K input, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software downloadable from Delta OHM website, CP23 cable. The Pitot tubes and cables have to be ordered separately.
#HD2134P.0: The kit consists of the HD2134P.0 with 200mbar full scale and thermocouple K input, 4 1.5V alkaline batteries, operating manual, case. The Pitot tubes have to be ordered separately.
HD2134P.2: The kit consists of the HD2134P.2 datalogger with 200mbar full scale and thermocouple K input, 4 1.5V alkaline batteries, operating manual, case and DeltaLog9 software downloadable from Delta OHM website, CP23 cable. The Pitot tubes and cables have to be ordered separately.
#HD2110CSNM: 8-pole connection cable MiniDin - Sub D 9-pole female for RS232C.
#PW: Extension with male-female standard miniature connectors to connect the Pitot tube’s thermocouple K to the instrument, length 2m.
#SWD10: Stabilized power supply at 230Vac/12Vdc-1000mA mains voltage.
#HD40.1: On request, portable, serial input, 24 column thermal printer, 58mm paper width.